Born In England - Chapter 202

In the next few days, Li Lin began to frantically search for weapon design drawings in [World War I and World War II Weapon Design Drawings].

Because, ten years later, there is still a real big battle.

By then the battle will be fought for several years.

Now that he has time, he must frantically produce a batch of weapons in advance for stocking, otherwise he is afraid that when the battle begins and enters the continuous stage, the production speed will not keep up with the consumption speed!

So, you have to stock up now.

Anyway, it is normal for this kind of firearms and shells to be stored for ten and a half years.

“Among the existing weapons, the Kar98k rifle plans to produce 500,000 in ten years! The M1 Garand rifle will produce 1 million! If the ammunition is used, the 98K bullet will produce 5 billion rounds, and the M1 rifle bullet will produce 10 billion rounds. !”

Don’t think that there are too many bullets, divide it down, and each gun is only 10,000 rounds of bullets.

For mortars, 30,000 shells should be produced first, and for cannonballs, 150 million shells should be produced first.

For 75mm mountain guns, 20,000 guns will be produced first, and 150 million shells will be produced first.

105mm howitzer, first produce 8,000 shells, first produce 100 million shells.

150mm howitzer, first produce 3000 shells, first produce 60 million shells.

Camel fighter, first produced 3,000.

Bombers, 5,000 are produced first.

Airplanes are several consumables, and it is estimated that customers will be in great demand at that time!

For submarines, produce 50 first!

For machine guns, first produce 20,000! If the machine gun bullets are to produce 15 billion rounds of bullets first!

For pistols, first produce 10,000! Bullets also produced 10 million rounds first.

In terms of warships, 9 cruisers and 3 battleships will be produced for the time being!

The above are all owned by Li Lin’s previous weapons company, and they are also producing and selling weapons.

Ten years from now, there will be huge changes.

Therefore, Li Lin intends to find a new batch of weapons, and I believe that many customers will like it.

“First of all, in terms of firearms, the two submachine guns will come out!” Li Lin secretly thought.

It’s not good if you come out with one. After all, both sides will sell weapons, and it will be embarrassing that both the enemy and us will use the same weapons on the battlefield. Therefore, it is necessary to produce 2 models, one for one side and one for the other. aside.

Ha ha!

It seems that Li Lin quickly took a fancy to 2 submachine guns, namely the M1921 Thomson submachine gun. Of course, the first Thomson submachine gun was the M1919. After it was successfully developed, the earliest production model was the M1921, which appeared one after another. M1923, M1928 series submachine guns. Among them, the M1928A1 type was successfully developed in 1930 and was equipped with a small amount of American imperialists.

Li Lin does not choose the M1928A1 which is too advanced, but can choose the second generation.

Overall length: 808-909 mm (31.8-35.8 inches)

Barrel Length: 267mm (10.5″), 368mm (14.5″)

Theoretical rate of fire: actual about 225-300 rounds/min

Effective range: 200 meters.

This, Li Lin intends to sell it to the British side.

Well, it suits them well.

The other one is the MP18 submachine gun.

Gun Length: 815mm

Gun weight: 4.17kg (empty gun weighs 4 kg)

Feeding method: 20/32 rounds of magazines (32 rounds of snail drums use 9x19mm Luger pistols)

Rate of fire: 400 rounds/min

Muzzle velocity 380m/s,

Range 150 meters.

Gu Fei

This one has a faster rate of fire than the previous model, but has a shorter shooting distance, which has its own advantages and disadvantages.

This piece, he intends to sell to the country.

“The selection of submachine guns is over, what else is there?” Li Lin began to think.

The rifle does not need to be updated for the time being.

The M1 Garand is also very advanced.

“For tanks, first choose a batch of light tanks to produce. It seems that it’s up to you!” Li Lin quickly took a fancy to a tank.

That is the No. 2 tank.

parameter:

The average thickness of the front armor is about 30 mm, while the rear side armor is 16 mm; the turret is also made of this, about 30 mm thick at the front edge and 16 mm thick at the rear side. The driver’s seat is located in the front left of the body, and the turret is located above the fighting compartment, slightly to the left. Its weapon is a 20mm Kwk30 cannon, which can fire PzGr.39 armor-piercing projectiles, PzGr.40 high-speed armor-piercing projectiles and Sprgr.39 high-explosive projectiles. 7.92mm machine gun ammunition.

At present, I don’t want to come up with a tank that is too advanced for the time being.

This No. 2 tank is just right, more advanced than the tanks of World War I.

Of course, a tank that is too advanced cannot be built by Li Lin at present.

The body of this tank is welded by surface-hardened steel plates, so it can still be produced when it is produced.

As for the power, hehe, his company can even build such a large marine diesel engine, and there is no problem with this small fuel engine.

“Let’s try the water first by producing 200 cars. It will be difficult if we can’t sell them by then!” Li Lin doesn’t plan to produce too many.

After choosing and choosing, he chose another tank.

The “Matilda” Type 1 tank has a total combat weight of 11 tons, a crew of 2, a vehicle length of 4.85 meters, a vehicle width of 2.29 meters, and a vehicle height of 1.87 meters. No matter in terms of size and combat weight, or in terms of the number of crew members, it can only be regarded as a light tank.

Due to the limitation of design thinking, the main weapon is only 1 7.7mm machine gun, and the firepower is too weak. Later, although the 12.7mm machine gun was replaced, it was quite difficult for the crew to control the shooting because the original turret was too small. The power plant is a Ford 8-cylinder gasoline engine with a maximum power of only 70 horsepower (51.5 kilowatts) and a maximum speed of only 12.8 km/h, not much faster than an ox cart.

Well, it can be sold to customers such as England.

Let these two tank rookies peck each other!

If this tank is to be produced, 200 units should be produced first.

After selecting the tank, the next step is the anti-tank machine gun, and three or four models were selected.

Then there are all kinds of bombs, torpedoes, and dozens of different kinds.

At that time, it will be developed and produced together!

a month later.

After Li Lin sorted it out, he threw all these design drawings to the R&D departments of various companies, making the employees in the departments dumbfounded.

Too much!

It is estimated that there will be a lot of overtime in the future.

In addition, Li Lin’s major companies are expected to continue production in the next few years~www.mtlnovel.com~ The major warehouses must also be established, otherwise it is really difficult to store so many things.

At this moment, if those potential customers in the future know that Li Lin is currently preparing for the business in ten years, they don’t know how to feel.

It is estimated that Li Lin will be torn apart!

The days go on.

Another year passed in a flash.

In the original steel business, there was a steel giant who wanted to buy Li Lin’s company, but he refused.

After all, he is rich and powerful, and the other party has no way to take him.

Especially in the past few years, the steel output is self-sufficient, and the other party can’t affect Li Lin’s business!

Even, Li Lin has won two iron mines in the past few years!

Especially chalcopyrite, very much needed!

Bullets need brass.