Dragon Wizard of the Heavens - Chapter 487

Wizard Tower, astronomy station.

Alan’s figure is standing in front of the central floating crystal, beside him are Bess, Selena, and Helen.

“Did you see clearly?”

A complicated structure of the floating city is suspended in the air. This is the current planning drawing of the floating city: “I need you to direct those dwarves and alien laborers to build according to the above requirements.”

“Can it be done?”

The three nodded and said, “No problem.”

Allen smiled and said, “Very well, go and prepare!”

The three people who had assigned the task slightly leaned over and left, and then the thousands of aliens and dwarves in the wizard tower began to get busy.

Atlantis, the central city.

A group of dwarves drew a line on the ground, and then the alien began to dig along the line. According to Allen’s drawings, the central city of Atlantis needed to dig a lot of gully.

Some of these gullies are for laying energy pipelines, and some are for constructing structures.

Pieces of obsidian were taken out of the warehouse, and then placed in the designated location in accordance with the specified requirements. Although Alien has wisdom, he can’t understand too complicated issues.

This work is carried out by Alan’s maids. By directing the dwarves and the opposite **** to work, a large amount of magic metal is also transported out of the storage room, and the floating city is reinforced after smelting.

Alan sat on the sofa and meditated. He was going to open another mine. The development of the islands of Salt Island is not high. Except for the largest Salt Island, the other islands are rarely visited, and some remote islands live in them. Savage or pirate.

These islands are relatively rich in minerals. I chose two islands that are relatively rich in minerals. Allen built a magic enchantment, covered the two islands, and then built a simple stronghold here.

Put those gold-eater cubs that have not mutated into it. The element concentration here is much lower than the wizard tower, which can guarantee that these gold-eaters will not change.

In addition to preparing to build the steel golem production line this time, Allen is also preparing to try to connect the Wizard Tower with the floating city.

The central city of Atlantis has been separated from the outer city. As long as the various energy pipelines are laid and the floating city is connected, you can try to lift off.

This is the main building of the floating city. After the main construction is completed, the Misuo and artificial magic nets will be gradually constructed.

The construction cycle of a floating city is likely to last for decades or even hundreds of years. Allen is going to notify the Five Ring Tower to send people to help.

In such a big city, if you rely on Alan alone, you will be exhausted, not to mention other things, just the whole floating city blessing the hardening technique is enough for you to work.

Hardening is not a very difficult spell. The official wizard can learn it with a little thought. In addition to hardening, various runes need to be engraved on the floating city to ensure that the floating city can be fast under any conditions. adapt.

The current wizard tower is not locked. Alan has a set of locks left by ancient wizards. During this time, it has been thoroughly studied. The locks obtained in the ruins are of a defensive nature, and they serve as a floating fortress of war. The empty city needs strategic weapon deterrence.

Therefore, the mystery of the floating city is basically a legendary structure that combines attack and defense.

“There are so many things that need to be done recently!”

Allen rubbed his temples, suddenly feeling a bit too busy.

In addition to transforming the floating city, the steel golem production line needs to be completed as soon as possible. Only when a steady stream of steel golems are produced can they launch a counterattack against the abyss and drive the abyss demon back home.

Compared with the stone golem production line, the steel golem production line is much more complicated, but the steel golem production line no longer needs the engraving process, but replaced it with the casting process.

The steel golem needs to add a large furnace to smelt various metals in a specific ratio, and the molten metal liquid will be poured into a specific mold.

There are several ways to produce steel golem parts. The simplest and most common is the casting method, but this method requires the production of molds every time, and the parts after casting need to go through a large number of post-processes. The casting method is suitable for manufacturing complex parts. .

In addition to the casting method, there are also plastic forming processes, such as forging, which is one of the simplest and oldest metal molding processes in the world by beating and extruding under the conditions of cold working or high temperature operation. Popular ways, such as blacksmithing.

Although this method is common and simple, unexpected results will occur in the hands of some masters, and this method is also the method with the most artifacts.

Rolling: The high-temperature metal billet passes through a number of continuous cylindrical rollers, and the rollers pierce the metal into the mold to obtain a preset shape. Compared with forging, rolling is obviously a lot more advanced, and mass industrial production starts here. Including the following extrusion, stamping, etc.~www.mtlnovel.com~Extrusion: a low-cost continuous processing with the same cross-sectional shape, solid or hollow metal molding process, which can be used for high-temperature operation and Perform cold work.

Impact extrusion: A process used to process small to medium-sized parts without taper requirements. The production is fast, and parts with various wall thicknesses can be processed, and the processing cost is low.

In addition to these, Alan got a lot of more advanced technology, powder metallurgy, from the world of predators.

Powder metallurgy: a process that can process ferrous metal components as well as non-ferrous metal components. Including the two basic processes of mixing the alloy powder and pressing the mixture into the mold. The metal particles are formed by high-temperature heating and sintering. This process does not require machining, the utilization rate of raw materials can reach 97%, and different metal powders can be used to fill different parts of the mold.

Powder metallurgy also has a more lofty name, 3D printer.

A 3D printer can manufacture almost all metal parts, and Allen is going to make a 3D printing device that specializes in the complex equipment in the steel golem.

“Scorching rays can be used to melt metal powder and add freezing rays for cooling.”

“You also need a computer with sufficient computing power. This is a bit cumbersome, but you can use Taring instead. This time I got a legendary soul spar from the world of Diablo just as a raw material.”

“Well, you also need to add an anti-gravity control device. In other words, this 3D printing device is really complicated.” Looking at the information obtained from the predator, Allen chose to use various spells instead.

After all, if the original copy is copied, there will be a lot of materials that cannot be processed. After all, some magic materials look very unscientific. A 3D printer made by magic technology, hehe! Thinking about it, it feels magical.